Do you have a problem with rust sticking to the lock on your house so that the lock can no longer be used? Do you know how to deal with the rust? If you don’t know it yet, don’t worry, the Locksmith will share easy and inexpensive tips so that the lock you use is not easy to rust or wear out due to continuous friction. In general, the rust that appears in the padlock is usually due to exposure to sunlight, dust, and raindrops continuously, so the padlock will rust faster and worn out. Instead of having to buy a new padlock, it would be nice to take care so that you don’t spend money from your pants pocket locksmiths247.
Put enough oil into the keyhole and between the locks of the locksmith, you can also use cooking oil if you don’t have new/used oil. Let stand a few moments so that the oil/cooking oil enters and soaks the one in the lock. After leaving it for a while, apply oil/cooking oil to the key stem and drop enough oil again into the keyhole. Turn the key repeatedly until it feels enough to be used again. If the key is difficult to insert or difficult to rotate because there is rust in it, use pliers to make it easier for you. Do not force it to rotate, because it will damage the per and can break the key bar, slowly until the key can rotate and can be used again.
If using oil or cooking oil is considered less modern, you can use WD as a lubricant for all types of locks. Take care of the padlock that you have regularly to avoid being damaged or damaged by friction. However, if the lock is outdated due to friction, you can duplicate the key without having to replace the existing lock. Basically, maintenance for keys such as car engines, keyholes and per-one that are in the lock cannot be left too long to dry out, if it dries up there will be friction between the key and per inside the padlock, so that friction and thinning arise.